JEEP® CHEROKEE FREQUENTLY ASKED QUESTIONS

The 2023 Jeep_® Cherokee can be equipped with one of three available 4x4 systems.

Models equipped with the Jeep Active Drive I 4x4 System, a fully automatic system, do not require driver intervention to switch in and out of four-wheel drive.

Models equipped with the Jeep Active Drive II 4x4 System and Trail Rated® Jeep Active Lock allow the driver to switch between High and Low modes. To shift from 4-Wheel Drive High to 4-Wheel Drive Low, follow these steps:   

    - Maintain a speed of 0-3 miles per hour.

    - Ensure the engine is running.

    - Shift the transmission into Neutral.

    - Push the 4-Wheel Drive Low button once.

    - The 4-Wheel Drive Low indicator light in the instrument cluster will begin to flash.

    - When the shift is complete, the light will remain on with a solid glow.

Repeat these steps to switch from Low to High Mode. The 4-Wheel Drive Low indicator light in the instrument cluster will turn off when in High Mode.

There are two ways to reset the oil change light on the 2023 Jeep® Cherokee.

Method 1:

- Without pushing the brake pedal, place the ignition in the ON/RUN Mode (do not start the engine).

- Navigate to the “Oil Life” submenu in the instrument cluster display.

- Push and hold the “OK” button until the gauge resets to 100%.

Method 2:

- Without pushing the brake pedal, place the ignition in the ON/RUN Mode (do not start the engine).

- Fully press the accelerator pedal, slowly, three times within 10 seconds.

- Without pushing the brake pedal, place the ignition in the OFF position.

Press the accelerator pedal all the way down and then release it. Do this two more times, for a total of three times, within 10 seconds.

-Turn the ignition off and then immediately back on.